A two components polymer modified bituminous thick layer waterproofing membrane.

Product Characteristics

• Seamless and joint less flexible crack bridging.
• Immediately rain proof.
• Rapid curing.
• Cross-binding continues under exclusion of air.
• Closing of the building pit under normal after 24 hours.
• Bonds without priming on damp or matt damp substrates.
• Can be applied without a primer.
• Simple and economical trowel application.
• General technical test certificate according to DIN 18195-2 available.

A two components highly flexible cementitious protective coating, providing resistance to water, moisture and abrasion. 2K/M is a standalone product, but it can be topped or overcoated with flexible or rigid mortars, stuccos or coatings for uniform appearance.

Product Characteristics

• Applied above or below grade.
• Permanently flexible - elongation up to 85%.
• 
  
• Bridges cracks up to 1/16 inch (1.5 mm).
• Accommodates substrate movement up to 1/25 inch (40 mils [1.0 mm]).
• Resists strong hydrostatic pressure. Tested up to 200 psi (13.8 bar) positive side water pressure.
• Safe for potable water.
• Stands up to pedestrian and light traffic.
• UV, weather and freeze-thaw resistant.
• Vapour permeable.
• Can be tiled or left uncoated.

A one-component, penetrating cementitious material which contains active waterproofing chemicals which react with moisture and free lime in the concrete, creating insoluble crystalline complexes which seal the capillaries and minor shrinkage cracks.

Product Characteristics

• Cementitious, capillary active waterproofing slurry.
• Against negative and positive water pressure (>13 bar).
• Especially for waterproofing of foundations, elevator pits, water tanks and retaining structures, parking garages, tunnels, etc.
• Technical regulations approval for structural waterproofing.
• Approved for potable water structures acc. to DVGW W270, W347 and ANSI NSF.